euroflex euroflex euroflex euroflex euroflex

KYMC America Neoflex GL:

Introduction

The NEOFLEX GL is KYMC's 1300+ FPM Gearless Central Impression Flexo Press built on an optional vibration dampening Mono-block heavy duty platform. The Mono-block frames are 4" thick for 8 and 10 colors for speeds up to 450 m/min. (1500 FPM)

The Neoflex is built with the same precision and technology from our experience building the CNC while making additional improvements. All printing stations are controlled with a high degree of accuracy to ensure excellent printing quality and a good price/value ratio on your investment.

Most of the press components are either manufactured in the US or available through US subsidiaries such as Rexroth/Indramat and PLC programmable controls by Simens. The Neoflex complies fully with OSHA and CE standards.


    FEATURES:
  • Fully Servo with optional direct drive CI drum motor
  • AC vector drives controlled by PLC for fully auto tension control.
  • Operator friendly designed touch screen operation.
  • Flying splice operation at maximum speed.
  • Air shafts with safety chucks for easy change over.
  • Available for 600mm, 800mm and 1000mm roll diameter.
  • Easy Operator touch screen control and memory management
  • Shaftless chucking system available.

Deck Positioning

Stablizing printing deck bars are solidly joined between either side of the frame to decrease vibration to a minimum for accurate registration at high speeds.

Deck positioning is programmed and done by their respective motors, with a sleeve system for the print and anilox rollers as a standard feature, for short runs and quick change over. Motor cross bars are eliminated by the individual deck motors, AC servo, that directly connect to the ball screws via couplings.




Zero Backlash

Zero backlash of deck position control for impression setting. Printing and anilox mandrel movement is achieved through high precision circulating ball type feeding screws, activated by four motors for each station.

Deck motors, AC servo, are directly connected to the ball screws by couplings. Supports of both printing and anilox air mandrels move on high precision linear guides. The liner guide is pre-loaded without any backlash, to avoid any lock-down needs. Anti-impact safety device is employed.



Optional Direct Drive Central Drum

Using an optional Direct Drive Central Drum via torque motor from Rexroth/Indramat, for extreme precision to the direct AC servo drives (Indramat) on both the plate and anilox sleeve mandrels.

Large diameter sleeve mandrels are used to insure vibration (bounce) free operation. Carbon fiber mandrels are available. The print sleeves will automatically push out on this press.



Vapor Capture Cabinet

The Neoflex comes standard with a modern enclosed CI printing cabinet/room with sliding doors for solvent vapor capture that complies with worldwide environmental requirements for minimum odor plan operation.






KYMC Quick-wash

KYMC continues their innovation with their quick wash system for efficient cleaning of doctor blade chambers, anilox rolls and ink hoses. This system uses much less solvent than any other system on the market. The system can also be used with water base inks.

The base canister system is a seperate unit to accomodate your floor layout needs while minimizing downtime.



Remote Diagnosis and Service

Instant service is critical to your business productivity. KYMC recognizes this by installing a modem on every press we manufacture for quick diagnosis and troubleshooting/servicing adjustments when available.








Electrical Cabinet

KYMC continues their commitment to maintain the highest up-time by enclosing the electrical into a cabinet located on the mezzanine deck with dedicated air-conditioned units.

The best value gearless press in the market with quality based on decades of proven technology for today's demanding market.


Turret Flying Splice

Another standard is KYMC's turret flying splice unwind/rewind with European phantom axis compact design.

Applications:

  • LDPE
  • LLDPE
  • HDPE
  • BOPP
  • CPP
  • PET
  • PP
  • Paper
  • Cellophane
  • Aluminumium foil
  • Laminates
  • Flexible Packaging etc


# of Colors 6 / 8 / 10
Machine Speed 1312 FPM
Material Width (inches) 26.37
34.25
42.12
50
53.93
61.81
Printing Width
(inches)
23.62
31.49
39.37
47.24
51.18
59.05
Roll Diameter 31.49 (39.37)
Repeat Length 360 - 800
Upcoming Conventions
Announcements


We thank for your trust in assisting your business.


Call us at 630-681-2521

JOIN OUR NEWSLETTER
Email: